Get Quote
ODM PRODUCT DEVELOPMENT LAB

Turn Your LED Mask Concept Into a Manufacturing-Ready Project

Start with your product concept, market and customization goals. We’ll help you identify the right development route—from private label to semi-custom ODM or full product development.

01Start with a product idea or existing platform
02Choose Private Label, Semi-Custom or Full ODM
03Understand MOQ, timeline and engineering scope
04Leave with a structured ODM project brief
See How ODM Development Works
STEP 1 OF 4

Step 1: What would you like to build?

Select the primary hardware form factor for your product initiative.

3 Models

Wireless Silicone LED Face Mask

Ergonomic skin-contact facial phototherapy mask engineered with food-grade liquid silicone rubber (LSR), high-density precision optical diodes, and snap-on magnetic controller.

⚡ 15W – 30W🎯 35 – 55 mW/cm² at skin contact
3 Models

Contour Rigid Shell LED Mask

Ergonomic ABS/PC optical composite shell with integrated eye shields, uniform light diffusion, and clinical 7-spectrum treatment modes for spas and dermatology practices.

⚡ 20W – 45W🎯 40 – 60 mW/cm² contact irradiance
3 Models

Targeted Neck & Décolleté Wrap

Precision contoured medical silicone wrap delivering high-density 630nm red & 830nm NIR light for delicate neck and chest rejuvenation. Works standalone or paired with face mask.

⚡ 15W – 30W🎯 35 – 50 mW/cm² at skin contact
3 Models

2-in-1 Face & Neck Pro System

Turnkey luxury beauty kit combining the silicone face mask and neck/décolleté wrap with a centralized magnetic controller, custom EVA travel case, and retail gift box.

⚡ 30W – 60W🎯 35 – 55 mW/cm² uniform coverage
3 Models

Orbital Eye & Periorbital Care Device

Compact wearable orbital mask with precision 590nm amber and 630nm red micro-LEDs, gentle microcurrent stimulation, and anti-glare silicone eye cushions.

⚡ 5W – 15W🎯 25 – 40 mW/cm² eye-safe irradiance
2 Models

Brand-Exclusive Custom Beauty Hardware

End-to-end ODM hardware engineering for cosmetic conglomerates and innovative beauty brands, from ergonomic clay modeling to ISO 13485 cleanroom mass production.

⚡ Custom Engineering🎯 Engineered to brand target protocol

Project Snapshot

Preliminary engineering assessment generated from your core project parameters.

Product FormWireless Silicone LED Face Mask
Development ModelSemi-Custom ODM
Target MarketsUnited States & Canada
PositioningPremium Boutique
📦Estimated MOQ
200 – 500 units
🏭Platform Status
Engineering review required

Platform availability for this device is confirmed during engineering review.

⏱️Typical Sample
3 – 5 weeks

Engineering samples typically delivered after technical specification freeze.

⚑Next Step
Engineering Review

Your configuration is specific enough for our engineering team to prepare an accurate quotation. Complete the project brief to submit.

Engineering Configuration Studio

Tailor optical spectrum, electronic control architectures, housing finishes, and regulatory scope.

1. Select Wavelength Spectrum (415nm – 1072nm)

Choose target wavelengths. Green indicates production confirmed; purple requires engineering review.

2. Optical Spectrum Mode

3. Optical Beam Distribution

ODM-2026-STUDIOSemi-Custom ODM
HARDWARE MANUFACTURING ARCHITECTURE

LED Mask & Phototherapy Device OEM & ODM Engineering Guide

Light Therapy Mask Manufacturer provides end-to-end hardware R&D, optical simulation, PCBA layout, and precision silicone tooling for red, near-infrared, blue, and yellow photobiomodulation devices. We empower beauty brands, dermatological clinics, and wellness innovators with data-driven manufacturing.

Validated Platform Private Labeling

Private labeling is the fastest and most capital-efficient path to launch certified LED face masks and beauty hardware. Clients leverage fully validated production chassis—including flexible liquid silicone face masks, ergonomic rigid contour shells, neck & décolleté wraps, and targeted phototherapy devices.

Because structural molds, biocompatibility certifications, and wireless battery systems are pre-qualified, brands avoid initial tooling (NRE) expenditures and long development delays. We deliver high-precision laser engraving, Pantone silicone molding, custom retail packaging die-lines, and localized instruction manuals within 2–3 weeks of artwork sign-off.

Semi-Custom Platform Modification

Semi-custom ODM is tailored for established brands requiring exclusive optical formulations or customized user interaction without reinventing basic mechanical architecture. Clients modify spectrum mixtures across 630nm, 660nm, 810nm, 830nm, 850nm, and 1064nm chips on proven aluminum chassis.

Options include custom 10Hz/40Hz gamma pulse modulation, multi-mode touch displays, integrated smart IoT apps, and proprietary secondary optical beam lensing (30°, 60°, or 90°). Every custom PCBA run is verified in our Everfine HAAS-2000 integrating sphere to guarantee dominant wavelength fidelity and uniform energy distribution.

Ground-Up Full ODM Product Development

Full ODM development delivers proprietary medical hardware from concept sketches, CAD models, or novel clinical indications. Our R&D team provides complete industrial design, optical ray tracing, multi-layer PCBA schematic engineering, thermal CFD airflow simulation, and precision injection mold fabrication.

All proprietary projects are protected by strict bilateral non-disclosure agreements (NDAs). Operating under an ISO 13485 medical device quality management system, we supply complete technical files, IEC 62471 photobiological safety reports, and biocompatibility documentation required for US FDA 510(k) clearance and CE MDR registration.

ENGINEERING LAB & TESTING CAPABILITIES

Verified Laboratory Infrastructure

Every photobiomodulation specification is measured with calibrated optical spectrometers and thermal imaging.

Everfine High-Accuracy Integrating Sphere SpectrometryOPTICAL • MEASUREMENT

Everfine High-Accuracy Integrating Sphere Spectrometry

Measurement: Everfine HAAS-2000 high-accuracy spectroradiometer, 1.5m integrating sphere at 25°C ambient.

Continuous calibrated spectral flux, dominant wavelength, FWHM spectral bandwidth, and total radiant power measurement for each LED batch.

Relevance to Your Project: Guarantees your custom wavelength ratio matches exact targeted nanometer specifications without spectral drift.
Thermal Distribution & Junction Temperature VerificationTHERMAL • REPORT

Thermal Distribution & Junction Temperature Verification

Measurement: FLIR radiometric thermal imaging after 4 hours of continuous rated electrical load.

Thermal gradient monitoring across flexible FPC substrate ensuring facial skin contact temperature remains strictly below 39°C.

Relevance to Your Project: Ensures comfortable, non-thermal phototherapy for delicate facial skin while maintaining stable diode output.
IEC 62471 Photobiological Eye Safety & Low-EMF ShieldingELECTRONICS • SPEC-SHEET

IEC 62471 Photobiological Eye Safety & Low-EMF Shielding

Measurement: Spectral radiometry and isolated flexible FPC driver circuit testing at skin contact.

Integrated silicone eye protection baffles and ground-plane isolated FPC routing eliminating harmful optical glare and electromagnetic emission.

Relevance to Your Project: Essential for skincare brands, medical spas, and aesthetic clinics demanding certified eye-safe phototherapy masks.
100% 4-Hour Burn-In Aging Protocol Prior to PackagingMANUFACTURING • PHOTO

100% 4-Hour Burn-In Aging Protocol Prior to Packaging

Measurement: Full electrical load cycling in high-temperature aging rack (40°C chamber) for 4 consecutive hours.

Every individual assembled unit undergoes automated current draw, power surge resistance, and thermal stress testing before packaging.

Relevance to Your Project: Eliminates infant mortality rates and keeps customer return/RMA rates below 0.2% globally.
DEVELOPMENT TIMELINE

Factory Project Delivery Roadmap

Structured 4-phase gateway process from optical ray tracing to high-volume containerized shipment. (6–8 weeks to mass production readiness)

PHASE 01
Week 1 – 2

Engineering Alignment & Spectrum Formulation

  • ✓ Optical ray tracing simulation for custom wavelength ratios
  • ✓ PCBA schematic revision & driver power budget calculation
  • ✓ Modified enclosure 3D CAD modeling & connector layout
Gate Sign-Off:Engineering Change Order (ECO) signed by client and factory team
PHASE 02
Week 3 – 5

Working Prototype & Laboratory Validation

  • ✓ Rapid prototype assembly with custom LED wavelength mix
  • ✓ Everfine integrating sphere spectroradiometer test report
  • ✓ Thermal infrared imaging & EMF radiation assessment (<0.1 µT)
Gate Sign-Off:Sample delivery to client and performance sign-off
PHASE 03
Week 5 – 6

Pilot Batch & Process Verification

  • ✓ Pilot trial run (50–100 units) on manufacturing line
  • ✓ Assembly fixture validation & calibration jig check
  • ✓ Packaging drop test & vibratory transit simulation
Gate Sign-Off:Production Readiness Review (PRR) approval
PHASE 04
Week 7 – 8

Mass Production & Delivery

  • ✓ High-volume SMT, housing assembly, and 100% aging protocol
  • ✓ Custom retail packaging insertion & accessory kit bundling
  • ✓ International containerized freight or courier shipment
Gate Sign-Off:Final batch inspection report release
TECHNICAL & COMMERCIAL FAQ

Frequently Asked ODM Questions

Answers to the practical questions buyers ask before handing a product idea to an ODM engineering partner.

Yes. You do not need a complete technical specification to start. If you have a product concept, target customer, reference product or desired use experience, we can help translate that into a preliminary development path for engineering review.

Get a Factory Quote

Start Your OEM/ODM Project

Submit your details below. Our technical sales engineers will review your configuration and contact you with wholesale pricing details.

Direct Sales Email
contact@ledmaskmanufacturer.com
Factory Hotline
+1 202 417 6530
Global Support
ODM/OEM design service, drop-shipping support.

Headquarters & Factory Address

Building A, LED Optoelectronic Industrial Park, Gulan High-Tech Zone, Longhua District, Shenzhen, Guangdong, China. 518110

✓

RFQ Submitted Successfully

Thank you for contacting Light Therapy Mask Manufacturer. Your request has been assigned to a technical product engineer. We will review your configuration specs and send a complete bulk pricing quote to your email within 12 hours.

WhatsApp+1 202 417 6530